Page 33
877-877-2269 | blackbox.com
Chapter 5: Configuring the Router
3. If your ISP provides a PPPoE connection, select the PPPoE/Russia PPPoE option. Enter the following parameters:
Figure 5-6. WAN—PPPoE.
• PPP Username/PPP Password —Enter the User Name and Password provided by your ISP. These fields are case-sensitive.
• Secondary Connection—It’s available only for a PPPoE connection. If your ISP provides an extra connection type such as
Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this
secondary connection.
- Disabled—The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended.
- Dynamic IP—You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area
network provided by your ISP.
- Static IP—You can check this radio button to use Static IP as the secondary connection to connect to the local area network
provided by your ISP.
• Connection Mode—choose the Internet connection mode.
- Always on—In this mode, the Internet connection will be active all the time.
- Connect on Demand—In this mode, the Internet connection can be terminated automatically after a specified inactivity period
(Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet connection to
stay active all the time, enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes to elapse before your
Internet access disconnects.
