Page 109
877-877-2269 | blackbox.com
Chapter 5: Configuring the Router
• Statistics Status—Enable or Disable. The default value is disabled. To enable it, click the Enable button. If it is disabled, the
function of DoS protection in Security settings will be disabled.
• Statistics Interval (5-60)—The default value is 10. Select a value between 5 and 60 seconds in the drop-down list. The Packets
Statistic interval indicates the time section of the packets statistic.
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Click the Refresh button to refresh immediately.
Table 5-1. Statistics table.
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Total
Packets
The total number of packets received and transmitted by the router.
Bytes
The total number of bytes received and transmitted by the router.
Current
Packets
The total number of packets received and transmitted in the last Packets Statistic
interval seconds.
Bytes
The total number of bytes received and transmitted in the last Packets Statistic
interval seconds.
ICMP Tx
The number of the ICMP packets transmitted to WAN per second at the
specified Packets Statistics interval. It is shown as “current transmitting rate / Max
transmitting rate.”
UDP Tx
The number of UDP packets transmitted to the WAN per second at the specified
Packets Statistics interval. It is shown like “current transmitting rate / Max
transmitting rate.”
TCP SYN Tx
The number of TCP SYN packets transmitted to the WAN per second at the
specified Packets Statistics interval. It is shown as “current transmitting rate / Max
transmitting rate.”
Operation
Reset
Reset the value of he entry to zero.
Delete
Delete the existing entry in the table.
There are 5 entries on each page. Click Previous to return to the previous page and Next to go to the next page.
