724-746-5500 | blackbox.com
Page 63
Chapter 6: Configuring Chassis Ports
6. Configuring Chassis Ports
Follow the procedures in this discussion to configure the WRT4000 Series Cellular Wireless Router chassis ports.
Also see Configuring the WRT4000 Series Cellular Wireless Router’s Serial Ports.
6.1 Port Interfaces
Confer with your network administrator to get values for this configuration.
1. Select the Network management area.
2. Select the Interfaces configuration area.
• The WRT4000 Series Cellular Wireless Router Interface Overview Screen is displayed (Figure 6-1).
Figure 6-1. WRT4000 Series Cellular Wireless Router Interface Overview Screen.
3. To define a new interface, select Add New Interface.
• The Screen to Create an Interface is displayed (Figure 6-2).
Figure 6-2. Screen to Create an Interface.
4. Fill out the fields on the Screen to Create an Interface.
5. Select the Submit button (in the lower right corner of the screen) to add the interface.
6. Select the Back to Overview button (in the lower left corner of the screen) to return to the general network interfaces screen.
• The WRT4000 Series Cellular Wireless Router Interface Overview Screen is redisplayed, showing the new interface.
