724-746-5500 | blackbox.com
Page 45
Chapter 4: Configuration—General Settings
c. Select Reset if you want to discard the screen’s configuration and use the previous settings.
8. Continue to Section 4.3.5.2, Selecting Time-of-Day Synchronization.
4.3.5.2 Selecting Time-of-Day Synchronization
NOTE: To use this procedure, NTP servers must already be configured. Follow the procedure in Section 4.3.5.1, Configuring Time-
of-Day Synchronization.
9. Do the following to navigate to any of the screens for system management.
a. Select the System management area.
b. Then select the System configuration area.
• The System Screen for General Settings is displayed (Figure 4-18).
Figure 4-18. System Screen, Time Synchronization Settings.
NOTE: Time-of-day Time Synchronization parameters are listed in the lower half of the screen (Figure 4-19). These parameters are
listed regardless of the heading (General Settings, Logging, or Language and Style) in the upper portion of the System
screen.
\
Figure 4-19. System screen, Time Synchronization Settings.
