724-746-5500 | blackbox.com
Page 76
Chapter 7: Configuring a MultiWAN for the WRT4000 Series Cellular Wireless Router
a. Do one of the following on the MultiWAN Policy Configuration Summary Screen:
i. Select an Edit button to revise a policy.
ii. Type a policy name in the box to the left of the Add button, and select that button to add a policy.
NOTE: If you try to add a policy that uses a name already listed, the screen will blank the entry and will wait for a new name. In
that case, repeat substep ii.
• In either case, the MultiWAN Policy Configuration Detail Screen is displayed (Figure 7-9).
Figure 7-9. MultiWAN Policy Configuration Detail Screen.
b. On the MultiWAN Policy Configuration Detail Screen, add members to develop a policy. Do the following:
i. In the Member Used field, type a member name. The name must be listed under Available Members in the lower portion of the
screen.
ii. If you want to add another member to the policy, click the button to the right of the field. Another field will be displayed; add
another member in that field. Continue until you have included all the members for this policy.
c. When you have finished configuring the policy, select the Save button; then select the Back to Overview button to see the
MultiWAN Policy Configuration Summary Screen.
d. If you need to configure another policy for the multiWAN, return to step 6a.
e. When you have finished configuring the policies for multiWAN configuration, do one of the following on the MultiWAN Policy
Configuration Summary Screen (recall Figure 7-8):
i. Select the Save & Apply button to save the configuration and use it immediately.
ii. Select the Save button to save the multiWAN configuration now and use it after the WRT4000 Series Cellular Wireless Router is
restarted.
iii. Select the Reset button to discard the changes and use the previously saved configuration.
7. Select the Rules tab.
• The MultiWAN Rule Configuration Summary Screen is displayed (Figure 7-10). On this screen, you can define and organize rules
for the multiWAN.
