724-746-5500 | blackbox.com
Page 32
Chapter 3: Installation
3.7 The Next Step
To log into the WRT4000 Series Router and configure it for your network, see the procedures in Chapter 4.
NOTE: If you installed a new SIM, GSM or LTE card, use the initialization stream provided by the GSM or LTE carrier to activate the
SIM in the carrier network. This activation can be set up in the WRT4000 Series Router’s custom command list. (Select
System, then select Custom Commands. Add the carrier’s activation commands to the list and save the commands. Each
carrier has a unique set of commands.)
