®
Configuration
Almost all configuration and operational aspects of the ServSwitch CX Uno units
are controlled via
on-screen menu
displays.
Overall initial configuration
When setting up a new installation, the following stages are recommended:
1
Enable the general ‘Security’ option
.
With security disabled (default setting), a local or remote user attached
to the ServSwitch CX Uno will have full and unrestricted access to all
computers and all ServSwitch CX Uno settings. In larger installations, you
are strongly recommended to enable security and set up individual user
accounts with access privileges.
2
Create an ADMIN (administration) password
.
All ServSwitch CX Uno units have a fixed user account that cannot be
deleted or renamed, called ADMIN. This user account is the only one that is
able to make important system changes. If you intend to use security, then it
is important to allocate a password to the ADMIN account
.
3
Create user accounts and allocate access rights
.
Use the ADMIN account to add user profiles, passwords and access rights
for each of the system users.
4
Provide names for computers
.
When numerous computers are attached, you are strongly advised to
provide names for each, to assist with recognition.
5 Configure the required ‘
Setup Options
’ and ‘
Global Preferences
’
Use the ADMIN account to determine key ServSwitch CX Uno settings and
timing characteristics.
HT
