64
4-, 8-, AND 16-PORT SERVSWITCH PS2/USB IP KVM SWITCH
5.3 Selecting Computers Using Keyboard Hotkey Commands
Each computer is assigned a numeric ID. To directly switch the KVM control to any
computer via a simple keyboard command sequence, do the following:
1. To invoke the hotkey mode, press the
Left-Ctrl
key twice within two seconds.
The switch will beep to indicate that it’s in hotkey mode.
2. Enter your desired switch port number (1–4). For example, if you press
Left-Ctrl Left-Ctrl
2, you’ll select the computer on port 2.
Or, do the following:
1. To invoke the hotkey mode, press the
Left-Ctrl
key twice within two seconds.
The switch will beep to indicate that it’s in hotkey mode.
2. Press the
up-arrow
or
down-arrow
keys to switch to the previous or next port,
respectively.
Table 5-1 lists the hotkey commands.
Summary of Contents for KV9404A
Page 3: ......
