23
CHAPTER 3: Installation
9. If you are using 1 to 16 optional Serial Access Units, connect the RJ-14
cable(s) (included with the Serial Access Unit[s], KV9-SRL) to the R-port on
the ServSwitch unit(s).
10. Power on the ServSwitch by connecting the AC adapter to a suitable power
outlet and the opposite end of the power cord to the 12-VDC port on the
ServSwitch unit’s rear panel.
11. Power on each of the managed computers, observing normal startup
procedures.
NOTES
1. You can choose to mix managed computers connected via PS/2 and
USB connections as necessary with no impact on features or
function.
2. Steps 5 and 6 are required only if you want to manage the
ServSwitch and its computers locally (that is, not over the Internet or
a LAN). While not required, we recommend adding these devices for
easier administration.
3. You can cascade multiple ServSwitch units to increase the total
number of possible managed computers. To take advantage of this
feature, refer to Section 5.1.
Summary of Contents for KV9404A
Page 3: ......
