13
CHAPTER 3: Installation
2. Connect a CAT5 cable to the ServSwitch unit’s LAN port. Connect the other
end of the cable to an Ethernet switch.
Figure 3-2. Connecting the ServSwitch to the Internet.
3. Power on the monitor and the ServSwitch. Using a paper clip or pen, press
the IP Setup button located on the ServSwitch unit’s back panel. Simply
follow the step-by-step instructions to finish the initial setup.
Figure 3-3. Connecting the power.
PS/2 monitor
Internet
USB keyboard
Ethernet
switch
16-Port ServSwitch PS/2
USB IP KVM Switch
(KV9416A)
PS/2 monitor
To power adapter
Internet
USB keyboard
16-Port ServSwitch PS/2
USB IP KVM Switch
(KV9416A)
IP Setup
button
Ethernet
switch
Summary of Contents for KV9404A
Page 3: ......
