12
4-, 8-, AND 16-PORT SERVSWITCH PS2/USB IP KVM SWITCH
3. Installation
3.1 Quick Start Guide
This quick start guide describes two different ways to quickly set up your
ServSwitch. These are described in
Sections 3.1.1
and
3.1.2
.
Before doing the initial setting:
1. Record your original computer settings, such as TCP/IP, in case you would
like to use this computer for other tasks.
2. Make sure you have the latest Java software downloaded from
http://www.java.com
.
3. Disable mouse acceleration on the host computer(s) and client computer.
See
Section 3.2
for details.
3.1.1 U
SING THE
IP-OSD S
TEP
-
BY
-S
TEP
M
ENU
(R
ECOMMENDED
)
Hardware needed:
• (1) 4-, 8-, or 16-Port ServSwitch PS/2 USB IP KVM Switch with a power adapter
• (1) keyboard and monitor
• (1) CAT5 cable with RJ-45 connector
1. Connect a USB keyboard and PS/2 monitor to the ServSwitch unit’s local
port.
Figure 3-1. Connecting a USB keyboard and PS/2 monitor
to the ServSwitch.
PS/2 monitor
USB keyboard
16-Port ServSwitch PS/2
USB IP KVM Switch
(KV9416A)
Summary of Contents for KV9404A
Page 3: ......
