Black Box 32144, Manual

Page: 37 / 195

174
MODEM 32144
Fig. B-9. Miscellaneous Options.
Op. mode fallback: 0=Bell 212A and 103, 1=V.22/V.21/V.23
Remote test: 0=enable, 1=disable
DSR during ALB: 0=enable, 1=disable
FP: 0=enable, 1=disable
LCD intensity: 0, 1... 7 (7=greatest intensity)
Speaker volume: 0=low, 1=medium, 2=high
Speaker control: 0=on, 1=on till CD, 2=off
misc 1
"misc1," "misc2," and "misc3" are displayed to help indicate
the relative positions of individual options across the LCD.
The "misc2", and "misc3" options are identified below.
1 2 3 0 0 0 0
Low-profile DIAG LED:
0=Connect status, 1=DTR status
CFI AB response on disconnect:
0=disable, 1=enable
Multimode handshake: 0=T1 timer,
1=V.32bis Annex A
misc 2 misc 3
0 1 0 0 0 0 0 F F F F 1 0 0 0 0 0 0 0 0
Wait for MNP link request (sec): 0=3, 1=7
Leased line interrupt:0=off, 1=on
Remote RTS signaling: 0=off, 1=on
Answer tone detection: 0=enable, 1=disable
Answer tone detection: 0=enable, 1=disable
V.13 operation: 0=off, 1=TX only, 2=RX only, 3=TX and RX
DTE=DCE speed: 0=disable, 1=enable
Penn/V.25bis DTR dialing: 0=enable, 1=disable