Black Box 32144, Manual

Page: 96 / 195

114
MODEM 32144
Table 5-1. Hayes Compatible Commands (continued)
Command Function/Explanation
Sn=v MODIFY S REGISTER. n is the register to be
modified; v is the value to be written.
Sn? READ S REGISTER. n is the register to be
read.
T TONE DIAL. No parameters.
V WORD/DIGIT RESULT CODE
V0 Result codes are transmitted as digits.
V1 Result codes are transmitted as words.
W WAIT FOR DIAL TONE No parameters, but
default wait time (register S7) is 30 seconds.
X SELECT RESULT CODE
X0 Selects basic result codes, 0-4.
Modem will blind dial (without dial tone).
X1 No speed indication; no busy or dial tone detect.
X2 Selects result codes 0-6, 10, 11, 13, 14, 15, and
18.
X3 Same as X1 except busy signal detect is
enabled. Selects result codes 0-5, 7, 10, 11,
13, 14, 15, and 18.
X4 Same as X1 except busy signal detect is
enabled. Selects all result codes. Connection
speed (up to 14,400 bps) indicated; busy
signal and dial tone detect enabled.
Note: Result code 8 is independent of the X
command; it is displayed only when the @ dial
modifier is used.
Y LONG SPACE DISCONNECT*
Y0 Disables long space disconnect.
Y1 Enables long space disconnect.
Z RECALL STORED USER PROFILE