41
9: DLC Configuration for LAN
Manager
The EZWebCon configuration software is the easiest way to configure the Terminal Server.
This chapter explains DLC/Digital Network Port configuration for Windows NT 4.x hosts.
Note:
The Server needs an IP address before you can use EZWebCon. See
Setting the IP Address on page 20 for instructions.
Printing using an LPD client is the preferred method for sending print jobs to the Terminal
Server. Windows 95 does not support DLC printing (see
Chapter 5
for more information).
9.1 DLC Configuration
9.1.1 Terminal Server Configuration
To use the DLC protocol, you must have one service with the DLC characteristic enabled.
The DLC characteristic may be associated with only one service on a given Terminal
Server.
Figure 9-1:
Enabling DLC
9.1.2 Host Configuration
To send print jobs from a Windows NT host to the Terminal Server, add the Terminal
Server as a Windows NT printer.
1
Double-click the
Printers
icon in the Control Panel.
2
Double-click the
Add Printer
icon.
3
In the window that appears, select
My Computer
and click
Next
.
4
Select the
Add Port
button.
5
Select
Hewlett-Packard Network Port
and click
New Port
.
If Hewlett-Packard port is not one of the available options, you must install DLC
printing from your Windows NT system disks. DLC is not installed by default.
6
Enter the Terminal Server hardware address. It is printed on the Terminal Server bot-
tom label.
Local>> DEFINE SERVICE LES_xxxxxx DLC ENABLED
Summary of Contents for 16-Port Rackmount 10/100
Page 90: ......
