38
7.2 LAT Host Troubleshooting
By default, the LAT error message codes on the host are not translated into text error
messages. If a LAT job fails and appears in the queue with an eight-digit hex result code,
the code can be translated by issuing the following commands:
Figure 7-4:
Translating LAT Error Codes
$ SHOW QUEUE/FULL/ALL queue_name
(note the error code nnnnnnnn)
$ SET MESSAGE SYS$MESSAGE:NETWRKMSG.EXE
$ EXIT %Xnnnnnnnn
Table 7-1:
Troubleshooting LAT Configurations Using a Port
Area to check
Explanation
The specified node name matches the
Terminal Server node name
Use the
Show Server
command to verify.
The specified port name matches the
port’s name
Use the
List Port 1
command to verify.
Summary of Contents for 16-Port Rackmount 10/100
Page 90: ......
