33
6.4 PCONSOLE Print Queues
1
Log in as Admin on the file server you will be changing.
2
At the prompt, type
PCONSOLE
to start the utility.
For example, if your file server is mapped to the F: drive, you would use the
F:
prompt.
3
From the main menu, choose
Quick Set-Up
.
4
When prompted by PCONSOLE, enter the information with which to configure the
print queue.
The print server name (LES_
xxxxxx
),
The new printer name (service name, such as LES_
xxxxxx
),
The new print queue name, and
The print queue volume (the name of the file server from which the printer re-
ceives print requests).
The remaining fields can be left in their default settings.
5
Press the
F10
key to save the print queue information.
6
Reboot the Terminal Server.
6.5 NetWare Host Troubleshooting
Table 6-1:
NetWare Host Troubleshooting (Bindery Mode)
Area to Check
Explanation
The print server names in PCON-
SOLE match the Terminal Server
name and its service name
Use PCONSOLE to check.
The Terminal Server NetWare access
table
Use the
Show Protocols NetWare Access
command.
Scanning too many file servers can cause a delay
between jobs. Configure the access list to only scan for
jobs on the file servers of interest.
Summary of Contents for 16-Port Rackmount 10/100
Page 90: ......
