8
Figure 3-1:
Sample Web Browser Login
Once you have connected to the Terminal Server, you will see the Black Box ThinWeb
Manager interface. Use the left-hand menu to navigate to subpages where you can
configure important settings as well as view statistics and other server information.
Figure 3-2:
Web Manager Interface
3.1.2.1 Disabling the Web Server and FTP Server
Disable the web server using the following command:
DEFINE PROTOCOL HTTP [ENABLED|DISABLED]
Disable the FTP server using the following command:
DEFINE PROTOCOL HTTP [ENABLED|DISABLED]
3.1.3 Incoming Logins
Incoming logins made via EZWebCon can be used to configure the Terminal Server.
Incoming LAT and TCP/IP logins can also be used.
Incoming Telnet is only possible if your Terminal Server has an IP address configured.
Incoming Telnet is enabled by default to allow TCP/IP connections. To change this setting,
use the
Define Server Incoming
command described in the
Command Reference
chapter
of the
Device Server Reference Manual
located on the CD-ROM.
Summary of Contents for 16-Port Rackmount 10/100
Page 90: ......
