37
7: LAT Configuration
The EZWebCon configuration software is the easiest way to configure the Terminal Server.
The following sections cover print configuration methods for LAT hosts.
Note:
The Terminal Server needs an IP address before you can use EZWeb-
Con. See Setting the IP Address on page 20 for instructions.
To use LAT you must obtain a LAT license from your dealer or Black Box and use the
Set/Define Protocol LAT License
command on your Terminal Server. LAT print queues
can be created by printing to a port or printing to a service. Printing directly to a port
requires no Terminal Server configuration.
Note:
Printing directly to a port is the easiest method for printing to the Ter-
minal Server. If you would like instructions for printing to a service,
see the Device Server Reference Manual located on the CD-ROM.
7.1 Printing Directly to a Port
1
Create a LAT application port that references the Terminal Server port.
Figure 7-1:
Creating LAT Application Port
2
Create and start a print queue that uses the LAT application port.
Figure 7-2:
Creating and Starting Print Queue
3
Add the commands to the SYS$MANAGER:LAT$STARTUP.COM file so the re-
quired LAT devices will be recreated after each host reboot.
Note:
LAT terminal device characteristics may have to be changed to cor-
rectly print certain files. See your VMS documentation for more infor-
mation.
4
Print to the queue.
Figure 7-3:
Printing to Queue
$ RUN SYS$SYSTEM:LATCP
LATCP> CREATE PORT LTAnnn/APPLICATION
LATCP> SET PORT LTAnnn/NODE=LES_xxxxxx/PORT=Port_n
LATCP> EXIT
$ INITIALIZE/QUEUE/START/ON=LTAnnn:/PROCESSOR=LATSYM
/RETAIN=ERROR queue_name
$ PRINT/QUEUE=queue_name filename.txt
Summary of Contents for 16-Port Rackmount 10/100
Page 90: ......
