65
DEFINE SERVICE
“name”
option
DLC {EN/DIS}
Specifies which service will handle print
requests from DLC hosts. DLC can be enabled
on one service per Terminal Server.
BANNER {EN/DIS}
When Enabled, causes the Terminal Server to
print a banner page before jobs.
BINARY {EN/DIS}
When Enabled, the Terminal Server will not
process data passed through the service. This
characteristic should be enabled when printing
PCL data.
EOJ string
Causes the Terminal Server to send an end-of-
job string to the attached device after every job.
Enter an end string or the word
none
.
FORMFEED {EN/DIS} When Enabled, causes the Terminal Server to
append a formfeed to the end of LPR print jobs.
POSTSCRIPT
{EN/DIS}
When Enabled, causes the Terminal Server to
assume the attached device is a PostScript
device and act accordingly.
PSCONVERT {EN/DIS} When Enabled, causes the Terminal Server to
place a PostScript wrapper around each job.
SOJ string
Causes the Terminal Server to send a start-of-
job string to the attached device before every
job. Enter a start string or the word
none
.
DEFINE SERVICE
“name”
option
TCPPORT string
Specifies a
raw
TCP listener socket for the ser-
vice. Enter a socket number (4000 to 4999) or
the word
none
.
TELNETPORT string
Specifies a TCP listener socket for the service.
Unlike TCPport, this option performs Telnet
IAC interpretation on the data stream. Enter a
socket number (4000 to 4999) or the word
none
.
INITIALIZE
option
DELAY num
Schedules a reboot after
num
minutes. Enter a
value from 0 to 120.
CANCEL
Cancels an impending initialization.
FACTORY
Reboots the Terminal Server to its factory
default settings.
NOBOOT
Forces the Terminal Server to stop in Boot Con-
figuration Mode rather than fully rebooting.
RELOAD
Forces the Terminal Server to download new
operational code and reprogram its flash-ROM.
Table 15-1:
Frequently-used Server Commands, cont.
Command
Option(s)
Description
Summary of Contents for 16-Port Rackmount 10/100
Page 90: ......
