BKI BLG-TC Series Operation Manual Download Page 4 | Manualshive

Page: 4 / 62

background image

Gas Auto-Lift Fryer

Introduction

2

Introduction

The BLG-TC series fryer with Training Central™ is compact, attractive and functional in design. The built
in Training Central™ program allow employees to manage virtually every operation—programming, cooking,
cleaning, filtering, boiling out, and more—simply by following intuitive, step-by-step screen instructions that
provide instant feedback. BLG fryers are constructed with a stainless steel fryer pot for easy cleaning. Exclusive
BKI

patented features and safety devices offer flexibility, efficiency and reliability plus

PERFECTION IN FRYING!

The BKI name and trademark on this unit assures you of the finest in design and engineering -- that it has been
built with care and dedication -- using the best materials available. Attention to the operating instructions
regarding proper installation, operation, and maintenance will result in long lasting dependability to insure the
highest profitable return on your investment.

PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT. If you have
any questions, please contact your BKI

Distributor. If they are unable to answer your

questions, contact the BKI

Technical Service Department, toll free: 1-800-927-6887.

Outside the U.S., call 1-864-963-3471.

Safety

Always follow recommended safety precautions listed in this manual. Below is the safety alert symbol. When you
see this symbol on your equipment, be alert to the potential for personal injury or property damage.

Safety Signs and Messages

The following Safety signs and messages are placed in this manual to provide instructions and identify specific
areas where potential hazards exist and special precautions should be taken. Know and understand the meaning
of these instructions, signs, and messages. Damage to the equipment, death or serious injury to you or other
persons may result if these messages are not followed.

This message indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.

This message indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.

This message indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe practices.

This message is used when special information, instructions or identification are required
relating to procedures, equipment, tools, capacities and other special data.

«
...
2
3
4
5
6
...
»

Summary of Contents for BLG-TC Series































































Reviews:

No comments

Related manuals for BLG-TC Series

Brand: Kalorik Pages: 55

DOMINATORPLUS E3865

Brand: Falcon Pages: 10

Brand: CombiSteel Pages: 31

Brand: kobi Pages: 16

Brand: Master equipment Pages: 3

Brand: Estate Pages: 12

Brand: Estate Pages: 20

Brand: Paula Deen kitchen electrics Pages: 24

Brand: DeLonghi Pages: 29

Superior 301HLDS Series

Brand: Star Manufacturing Pages: 12

Brand: Haden Pages: 18

Drymatic Boost Bar FGPH102

Brand: DBK Pages: 17

Brand: NUTRICHEF Pages: 8

Brand: NUTRICHEF Pages: 14

Brand: NUTRICHEF Pages: 10

Brand: NUTRICHEF Pages: 12

Brand: inventum Pages: 20

Brand: Mitsubishi Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands