BKI BLG-TC Series Operation Manual Download Page 14 | Manualshive

Page: 14 / 62

background image

Gas Auto-Lift Fryer

Installation

12

Initial Test and Adjustment

1. Turn on the gas at the gas supply valve.

2. Place the DRAIN handle in the CLOSED position.

3. Fill pot with shortening to just above the oil level mark.

Risk of fire exists if the oil level drops below the minimum oil level. The level of oil
within the pot must not fall below 5mm of the maximum oil level.

Use of oil/shortening older than the manufacturers recommendations for life of
the oil is prone to surge boiling and flash fires. Follow the oil manufacturers
guidelines for lifecycle of oil/shortening.

Overfilling the fryer pot with shortening could lead to serious injury. Ensure that
the fryer pot is filled with shortening only to the fill mark when shortening is hot.
Do not use any shortening other than what is specified in this manual and do not
overfill the fryer pot.

The fryer has a maximum temperature setting of 375º F/191º C. Do not use
oil/shortening with a flashpoint less than 554º F/290º C

Use only high-quality shortening that has low moisture content, a high smoke
point and no additives.

4. Before you turn on the gas, wait at least five minutes to allow any gas that may have accumulated in the

burner compartment to escape.

5. Turn fryer on by touching the

ON

button for 3 seconds. Follow the startup instruction below. Add more

shortening as required to reach the fill mark. Refer to the troubleshooting section if this does not occur.

«
...
12
13
14
15
16
...
»

Summary of Contents for BLG-TC Series































































Reviews:

No comments

Related manuals for BLG-TC Series

Brand: Lotus cooker Pages: 49

Brand: Monogram Pages: 24

DOMINATORPLUS E3865

Brand: Falcon Pages: 10

Brand: Henny Penny Pages: 82

Turbo-Tuff 10-0135-2

Brand: ASI JD MACDONALD Pages: 8

Brand: Hendi Pages: 64

Brand: GEAppliances Pages: 144

796.6152 Series

Brand: Kenmore Pages: 72

Brand: Kenmore Pages: 1

Brand: Kenmore Pages: 30

Brand: Kenmore Pages: 108

Brand: Kenmore Pages: 72

796.6142 Series

Brand: Kenmore Pages: 72

Brand: Kenmore Pages: 40

Brand: Kenmore Pages: 2

Elictronic 27" Wide Electric Dryers

Brand: Kenmore Pages: 38

Front Load Washer

Brand: Kenmore Pages: 72

Brand: Kenmore Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands