BKI BLG-TC Series Operation Manual Download Page 17 | Manualshive

Page: 17 / 62

background image

Gas Auto-Lift Fryer

Operation

15

Risk of fire exists if the oil level drops below the minimum oil level. The level of
oil within the pot must not fall below 5mm of the maximum oil level.

Use of oil/shortening older than the manufacturers recommendations for life of
the oil is prone to surge boiling and flash fires. Follow the oil manufacturers
guidelines for lifecycle of oil/shortening.

Overfilling the fryer pot with shortening could lead to serious injury. Ensure that
the fryer pot is filled with shortening only to the fill mark when shortening is hot.
Do not use any shortening other than what is specified in this manual and do not
overfill the fryer pot.

The fryer has a maximum temperature setting of 375º F/191º C. Do not use
oil/shortening with a flashpoint less than 554º F/290º C.

Use only high-quality shortening that has low moisture content, a high smoke
point and no additives.

4. Once the fryer is filled with shortening, press the

FRY

button.

5. Confirm the oil level by pressing the green check mark.

6. The fryer will start heating up by going into a melt cycle. It will pulse the elements until the oil gets to 225°

F (107° C) and then goes into heat mode until it reaches the setpoint temperature. The recipes will be
greyed out and inaccessible until the fryer reaches setpoint temperature. (If the burner does not light and
you get a

Gas Alarm

, see the Gas Alarm instructions in the Troubleshooting section.)

«
...
15
16
17
18
19
...
»

Summary of Contents for BLG-TC Series































































Reviews:

No comments

Related manuals for BLG-TC Series

Brand: Sierra Pages: 25

Brand: Kitchen Advance Pages: 10

Perfoma PYE4500

Brand: Maytag Pages: 9

FRIGGISANO DUO G10150

Brand: G3 Ferrari Pages: 28

Brand: Dyson Pages: 24

Brand: Gourmia Pages: 20

Brand: Hoover Pages: 120

PULVIS MINI SPRAY GB210A

Brand: Yamato Pages: 58

Brand: Maytag Pages: 72

Brand: SALUPO Pages: 32

Brand: Human Pages: 12

Brand: Mediclinics Pages: 40

Brand: Bosch Pages: 10

Brand: Bosch Pages: 32

Brand: Bosch Pages: 10

Brand: Bosch Pages: 40

Brand: Bosch Pages: 40

Brand: Bosch Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands