Measure
105
11.4 Gate Measurement
The 2194 supports gate measurements and performs the selected measurement within the upper and lower limits of the
gate. Setting the gate will affect the measurement of all voltage, time, and delay parameters.
1. Press
Measure –> Gate –> On
to open the gate measurement.
2. Press the
Gate A
softkey to move the position of gate A by the
Universal Knob
.
3. Press the
Gate B
softkey to move the position of gate B by the
Universal Knob
.
4. Press the
Gate A-B
to move the positions of the gate A and B simultaneously by the
Universal Knob
.
Figure 11.8
Gate Measurement
11.5 Clear Measurement
Press the
Clear
softkey to clear all the measurement parameters that are displaying on the screen.
Summary of Contents for 2194
Page 1: ......
Page 82: ...Serial Trigger and Decode 82 Figure 7 29 LIN Trigger ...
