Trigger
50
Use a Custom Video Trigger
Custom video triggering supports frame rate of 25Hz, 30Hz, 50Hz and 60Hz, and the line range is available from 300 to
2000. The steps below show how to set custom trigger.
1. Press the Setup key to enter the
Trigger
menu.
2. Press the
Type
softkey, then use the Universal Knob to select
Video
.
3. Press the
Source
softkey, then use the Universal Knob to select
CH 1
as the trigger source.
4. Press the
Standard
softkey, then use the Universal Knob to select
Custom
as the trigger source.
5. Press the
Setting
softkey to enter the custom setting function menu.
6. Press the
Interlace
softkey, then use the Universal Knob to set the desired value.
7. Press the
Of Field
softkey, then use the Universal Knob to set the desired value.
8. Press the
Sync
softkey to enter the
TRIG ON
menu.
9. Press the
Type
softkey to select
Any
or
Select
.
• If
Select
was chosen:
– Press the
Line
softkey, then use the Universal Knob to set the desired value.
– Press the
Field
softkey, then use the Universal Knob to set the desired value.
Summary of Contents for 2194
Page 1: ......
Page 82: ...Serial Trigger and Decode 82 Figure 7 29 LIN Trigger ...
