BK Precision 2194, User Manual

Page: 112 / 139

Save and Recall 112
13.2 Internal Save and Recall
Internal save and recall support Setups in Save/Recall . In the following part, the save and recall method and procedures
are introduced.
Save the specified oscilloscope setting in internal memory.
1. Connect the signal to the oscilloscope and obtain stable display.
2. Press Save/Recall key on the front panel to enter the SAVE/RECALL function menu.
3. Press the Save softkey to enter the SAVE function menu.
4. Press the Type softkey and then turn the Universal Knob to select Setups ; and then press the knob to confirm.
5. Press the Save To softkey to select Internal to save the current setup of the oscilloscope to the internal memory.
6. Press the Setup softkey button; and then turn the Universal Knob to select the location to save. The internal
memory can save as many as 20 setup files, from No.1No.20.
7. Press the Press To Save softkey to save the current setup to the appointed location. After a few seconds, it will
pop-up the message “ Saved to internal file NO.1! ”
Load the specified type of file in internal memory.
To recall the setup after having finished the steps above, please do the following steps:
1. Press the Recall softkey enter the RECALLING function menu.
2. Press Type softkey and then turn the Universal Knob to select Setups; and then press the knob to confirm.
3. Press the Recall from softkey to select Internal.
4. Press Setup softkey button; and then turn the Universal Knob to select the location to recall. The internal memory
can recall as many as 20 setup files, from No.1No.20.
5. Press the Press To Recall softkey to recall the current setup form the appointed location. After a few seconds, it
will pop-up the message “ Recalled file successfully !"
Note:
If need to delete a setup file in the memory, please save a new setup to the same location to overwrite it.