BitFlow NEO-PCE-CLB Hardware Reference Manual Download

Page: 155 / 300

Camera Control Registers

CON11 Register

Version G.5

BitFlow, Inc.

NEO-8-57

ALAST_ADD

RO, CON11[14..0], Alta, Karbon-CL, Karbon-CXP, Neon, R64

Last address for lane A (used for diagnostics).

DPM_WP

R/W, CON11[15], Alta, Karbon-CL, Karbon-CXP, Neon, R64

Prevents the DPM memory from be written by the acquisition engine. Should normally
be set to 0.

BLAST_ADD

RO, CON11[30..16], Alta, Karbon-CL, Karbon-CXP, Neon, R64

Last address for lane B (used for diagnostics).

UART_MASTER

R/W, CON11[31], Karbon-CL

This bit controls which Karbon VFG is in control of the UART. Poke this bit to one in
order to take control of the UART.

Summary of Contents for NEO-PCE-CLB













































































































































































































































































































Search results

Summary of Contents for NEO-PCE-CLB

Reviews:

Related manuals for NEO-PCE-CLB

Brands by name

Popular brands

BitFlow NEO-PCE-CLB, Hardware Reference Manual

Search results

Summary of Contents for NEO-PCE-CLB

Reviews:

Related manuals for NEO-PCE-CLB

Brands by name

Popular brands