manualshive.com logo in svg

BitFlow NEO-PCE-CLB, Hardware Reference Manual

Share
Download
BitFlow NEO-PCE-CLB Hardware Reference Manual Download Page 118

CON2 Register

The Neon

NEO-8-20

BitFlow, Inc.

Version G.5

CMDWRITE

R/W, CON2[30..28], Alta, Karbon-CL, Karbon-CXP, Neon, R64

This registers selects the interrupt bit to be modified by the host. While an interrupt’s 
code is set, that interrupt can not be asserted by its source. It can be modified only by 
the host. This mechanism allows to perform reliable read-modify-write cycles. 

QTBSRC

RO, CON2[31], Alta, Karbon-CL, Karbon-CXP, Neon, R64

Always read back 1.

CMDWRITE

Interrupt allowed for host access

0 (000b)

No interrupt can be accessed by host 

1 (001b)

INT_CTAB

2 (010b)

INT_OVSTP 

3 (011b)

INT_HW 

4 (100b)

INT_TRIG 

5 (101b)

INT_QTAB

6 (110b)

INT_EOF

7 (111b)

reserved

Summary of Contents for NEO-PCE-CLB













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands