BCP-760
Operation Guide
Page 8 of 31
Chapter 3.OPERATING MODES
1.7
Keyboard Modes --- Using BCP-760’s keyboard
The keypad of BCP-760 consists of 27 rubber keys, the
⊙
key is used to switch on/off the unit and other 26 keys are
used to control the unit and key in data. The use of keyboard is categorized to three modes: normal mode, command
mode, and alpha(betic) mode. All keys except
⊙
key may produce a sound (tone) when pressed. Keys of upper four
rows have larger size for easier key-pressing to input numbers.
[
⊙
]
When the unit is off, pressing the
⊙
key will turn on the unit. On the other hand, when the unit is on it is
needed to press and hold down the
⊙
key for about one second in order to turn the unit off.
[CMD]
Pressing the [CMD] key sets the keyboard to Command mode. However pressing and holding down the
[CMD] key for two seconds in Ready mode will enter the User mode. In User mode, users can invoke
system commands by menu selection.
[CMD] then [Alpha]
In User mode or Supervisor mode, pressing the [CMD] key and then pressing [ALPHA] key
will exit from the current operation to the previous operation.
NORMAL
mode
COMMAND
mode
ALPHA
mode
press [CMD]
press [CMD]
press [ALPHA]
press [ALPHA]
press [CMD]
press [ALPHA]