DATE-TIME SETUP
1998/01/01
08:00:00
BCP-760
Operation Guide
Page 13 of 31
Source/
file1
COM
output content of file1 to serial port
Destination
file1
CON
output content of file1 to LCD
Combination
COM
file2
input data from serial port and store in file2
CON
file2
input data from keyboard and store in file2, pressing [CMD] then
[Alpha] to end the data input
1.8.1.8
SET
The SET command allows the user to set system date-time, select type of bar
code scanner, assign laser module scanning method and enable double
verification. Select the corresponding number, 1-4, to invoke a function. Pressing
the [CMD] and then the [Alpha] key returns the portable terminal to the User
Mode menu.
1.8.1.8.1
DATE & TIME
Set System Clock/Calendar
By selecting “1.DATE & TIME” in the SET menu, you can set the BCP-760 date and time. The date and time
can be used as the time stamp to be appended to an input data record by an
application program. The second line shows the current system date in the
format
YYYY/MM/DD (year/month/day). For instance, 1998/01/01 indicates that
date is
January 1, 1996. If you want to reset the system date to August 31, 1997, then
enter [1],
[9],[9],[7],[0],[8],[3],[1]. Or press the [ENT] key to skip the system date setting.
The third line shows the current time. The setting method is similar to setting the date. The time is expressed
in the 24-hour system in the format HH:MM:SS (hours:minutes:seconds).
1.8.1.8.2
SCANNER
SCANNER
The bar code input interface of the BCP-760 is compatible to all major bar code scanners
that are available in the market including wand, CCD and laser diode scanners. Use the [
]
key to toggle among ENABLE and DISABLE, then press [ENT].
LASER TRIG MODE : User can select whether pen is activate to read barcode label by one trigger/one
scan or flash scan.
If it is set NORMAL, laser beam will be emitted to scan barcode and it will stop laser
beam after successfully scan barcode. User need to release trigger key and then press again
to scan next label.
If it is set to FLASH, user just press trigger and then release it, then scanner will
automatically scan barcode. When it successfully read a barcode, scanner will continuously
emit laser beam to read next label. User can press trigger again to stop automatic scanning.
LASER AIM When BCP-760 is equipped with SE1200LR engine, user can use this setting to activate
aim beam before starting scanning barcode. It will be helpful for user to focus target
barcode label. Use the [
] key to toggle among ENABLE and DISABLE, then press
[ENT].
VERIFICATION When label quality is not good, and then cause error decoding. You can enable this
function to let BCP-760 double verification input barcode. When it is set ENABLE,
BCP-760 read barcode label twice to compare if it read the same data.
1.8.1.8.3
DISPLAY
Enable/Disable whether to show the Power-on LOGO.
Power-on LOGO enabled is the default setting.
1.8.1.8.4
KEYPAD:
<SYSTEM SETUP>
1.DATE & TIME
2.SCANNER
3.KEYPAD
4.EXIT