BCP-760
Operation Guide
Page 20 of 31
NOTE: To conserve battery power, keep the BCP-760 in
STAND BY
mode while waiting
for input.
3.2.3.6 Password Definition
This function is used to create a password. The password is used to prevent an
unauthorized user from entering the Supervisor mode and accidentally
change the BCP-760 configuration parameters. The Password may consist of
maximum ten (10) alphanumeric characters ('A'-'Z', '0'-'9'). The Default
password is
“760
”.
At the User Mode menu:
1. Press 6 (6.PSWD)
2. Enter the new password
3. Press [ENT] to change the Password
3.2.3.7 Initialization
The user can command the BCP-760 to execute a Cold Start that will clear all data stored in the RAM Disk
and configure the terminal to default values.
Make sure your data has been backed up to a Host/PC before performing this function.
At the Supervisor Mode menu:
SELECT 7
Select 1
Select 2
When 1.COLD START is selected, press [1] for YES to confirm and execute a Cold Start, purge the RAM
DISK and return to the Ready Mode menu. Press [0] for NO, abort Cold Start and return to User Mode Menu
When 2.PROGRAMMING is selected, there is three items can be choose. This is one of the main feature
provide by the BCP-760. User can select one of the program to add/erase user’s program saved in the
FlashROM of the BCP-760, or updating the BCP-760 system BIOS firmware.
1.
ADD PROGRAM
, the BCP-760 allows user store the application program into the FlashROM. The size
of the FlashROM for the application program is 128KB. When ADD PROGRAM was selected, the
BCP-760 will shows the available FlashROM free information on the screen. User may save multiple
application programs into the FlashROM if the free space is still available. User may move the application
program from the RAM disk to the FlashROM and free up RAM disk for data storage. This feature will
also prevent any application program lost due to any accidental system failure or cold start.
2.
DELETE PROGRAM,
it allows user delete all of the application programs stored in the FlashROM.
User will not allow to delete any single application program but delete all the application program store
in the FlashROM. User will need to confirm the program delete twice in case of any accidental input.
OLD PASSWORD:
760
NEW PASSWORD:
█
1.DEV
2.TERM
3.MEM
4.FORM
5.PWR
6.PSWD
7.SYS
8.DIAG
<SYSETEM INITIAL>
1. COLD START
2. 2.PROGRAMMING
!! WARMING !!
PRUGE RAM DISK!
Are You Sure ?
1=YES/0=NO
<PROGRAMMING>
1.ADD PROGRAM
2.delete all
3.update bios
