further assistance.
Water is leaking from the cell....
1.)
Check connections for intake and outflow tubing.
Reposition over barbs. Tighten clamps on the barbs of the
wall fitting.
2.)
If water is definitely coming from the cell itself, it
may need to be replaced.
There seems to be white flakes all over my spa....
1.)
This is normal in hard water situations.
2.)
BiO2 actually works to soften the spa water.
3.)
Water should eventually become soft and this will stop.
4.)
Due to the self cleaning feature of BiO2, during the
cleaning cycle (comes on for every 3 hours of operating
time) scale may be deposited into the spa water. Stain
and scale inhibitor may be used.
The Check Salt Light is on.....
1.)
If it is steady -
a. The salt level is low, check with Salt Test Strips.
b. Sodium chloride level should be 1,200-1,500 ppm.
c. Add number of units where 1 unit equals 1 packet (58
grams) of sodium bromide (scheduled or registered, for
use in spas, under the Pest Control Products Act) and 454
grams of non-iodized table salt (sodium chloride)
according to chart below.
Spa Capacity in Litres (Imp Gal)
Starti
ng
Salt
Concen
tratio
n
756 L
(166)
945 L
(207)
1134 L
(249)
1323 L
(290)
1512 L
(332)
1701 L
(373)
1890 L
(415)
300-
2
2
2
3
3
4
4
