a. If less than 9, increase to the next Maintenance
Level.
b. If the Maintenance Level is set at 9 and BiO2 is
operating properly, call the BiO2 Help Desk to reprogram
your unit.
4.)
Have the two 58 grams bags of potassium monopersulphate
been added to the spa?
5.)
If the unit is not equipped with Usage Sense, is the
BLAST
Button pressed upon entering the spa?
6.)
Is the filtration cycle adequate?
a. Filtration Cycle should be at least 8 hours in a 24
hour period to ensure proper sanitation levels.
b. Is the spa filter clean?
7.)
If BiO2 unit is equipped with Usage Sense, press the
BLAST
button for a boost in the sanitizer level.
I can't adjust the display...
1.)
Lockout function may be enabled.
a. To disable, press the SET LEVEL & BLAST buttons
simultaneously until an
AA
L
@@
is seen in the display window.
Release the buttons, while the
"L"
is still displayed.
2.)
Shut down power to the spa. Wait 30 seconds before
resetting.
3.)
Touch pad may need to be replaced. Call BioQuest help
desk for further assistance.
TROUBLESHOOTING
CONDITIONS (cont'd)
All lights or no lights lit on the touch pad...
1.)
Shut down main power to the spa. Wait 30 seconds before
resetting.
2.)
Touch pad may be faulty. Call BioQuest help desk for
