4)
Continue to push the SET LEVEL button to program BiO2 to
the desired maintenance level. Sanitizing levels for BiO2
range from 1 (the lowest setting) to 9 (the highest
setting). We recommend starting with level 1. After the 9
the display loops back to 0, the Off position.
Please note: There is no need for the spa's system to be on
while you are adjusting BiO2. BiO2 works independently of the
spa's pump and jet system.
USAGE SENSE
Some models of BiO2 automatically activate when the spa's high
speed jet pump is on to sanitize the water while the spa is
being used. That is the time when water sanitation is most
needed. A letter
U
will appear in the LED window to indicate
that BiO2 has sensed spa usage and is activated. BiO2 will
remain in Usage Sense mode for 2 hours after spa use and then
will return to the Maintenance Mode.
If your BiO2 system is not equipped with "Usage Sense" simply
push the BLAST button as you enter the spa. This effectively
simulates Usage Sense.
OPERATING BiO2 (cont'd)
STEP 4.
PROTECTING YOUR TOUCH CONTROL SETTINGS
LOCKOUT FEATURE
LOCK Your BiO2 touch control pad can be locked to prevent
accidental tampering with the SET LEVEL or BLAST buttons. To
activate the Lock Out feature, press and hold both the
SET
LEVEL
and
BLAST
buttons simultaneously until an
L
appears in
the LED window. Release both buttons while the L is displayed.
The L indicates that the Lock Out feature is now active.
UNLOCK
To
A
unlock
@
: the touch control pad, follow the same
procedure. Press and hold both the
SET LEVEL
and
BLAST
buttons
simultaneously until the
L
reappears in the LED window.
Release both buttons while the
L
is displayed. The Lock Out
feature is now deactivated.
REGULAR MAINTENANCE
