8
Installation Precautions
Do not install the product in a place where the
sunlight comes in directly or the temperature
goes below zero.
If not followed, the case can be
transformed or broken due to freezing.
Precautions for connecting the acidic water
hose.
Install the acidic water hose lower than the main case.
If the hose is longer than necessary or higher
than the main case, the ion generation can
be affected, possibly leading to a change in
the taste of water.
Should connect the product to the cool water
pipe (If connected to the warm water pipe,
the purification filter and the electrolytic bath
can be damaged)
If not followed, the life span of the filter will
be shortened.
Avoid any place where heat of fire can be directly
contacted
If not followed, the case can be transformed,
possibly leading to water leakage
Do not modify the product arbitrarily.
Do not use the product in a place full of moisture
or dusts
If not followed, damage to the product or risk to
your safety can be caused.
If not followed, damage to the product or risk to
your safety can be caused.
Should hold the bottom plate of the main case.
It will be safe to move the product by holding the
product at the bottom plate.
Do not place any other objects on the product.
Do not install the product in the areas described as the following.
Caution
If the product is dropped, electric shocks can be caused due to the internal malfunction following the
impact from the dropping. The product needs to be taken to the sales shop or the main office in
order for you to request an inspection.
The purification filter can be broken due to freezing if the product is used in a place where it is
freezing cold, requiring the product, if not used, to be stored in a place where the breaking due to
freezing can be prevented, but after the purification filter is removed first.
Caution
- Malfunction or accidents can be occured.
No warm water
Requiring you to check the rated voltage before
connecting the electric cord.
