10
2. Deck type sink mounted water tap
The following fools ate necessary for installation work
[Drawing 1]
Electric drill
Hole cutter
Size:
Diameter1/4”
Pipe wrench
or spanner
General
screwdriver
1. Prepare the tools for installation as drawing : Electric drill,
Hole cutter, Pipe wrench or spanner, General screwdriver,
Teflon tape 1pc (Drawing 1.)
2. Turn off the water valves before installation under the
sinkdeck.
3. Disconnet the water tap from the cold water pipe.
4. Drill a hole for the 1/4" hose appropriate place
somewhere in sinkdeck and make the connection to the inlet
of the product
5. Find the cold water pipe inside the sink deck and connect
the adapter to the cold water pipe (Drawing 2.)
[Drawing 2]
[Drawing 3]
[Drawing 4]
6. Connect the standard connection hose (1/4") to the adapter
installed with one touch fitting of union. (Drawing 3~4)
Insert the inlet hose deepest into the one touch fitting and insert
the safety pin as in drawing.
( Pls check if the hose has been securely fitted to the end of one
thouch fitting. if not, it causes water leakage for water pressure )
7. After the connection, adjust the water pressure control screw
to an appropriate level
(Alkaline water flow standard 1.5
0.5
/min )
8. Check any possible water leakage at the connection parts
after the installation
Should use the standard inlet hose (1/4") and fix
the valve cover in the direction of the hose to
prevent the hose from being bent or fastening
nut from being loosened.
Water valve of Cold water
Water pipe
Steel Hose
Ring nut
Groove
Cold water side
Hot water side
Water pressure
adjustment screw (Spindle)
Running water line
connection
Adaptor(small)
Place of hole drilled
Teflon tape
Acidic Water Outlet
