17
Selecting alkaline ionized water
Selecting acidic ionized water
1. Open the water supply control valve to let the water
flow in.
2. Use the pH button to select a stage.
- The value of selected pH stage is indicated.
- In case of “Alkaline”, any value between stage 1~5
will be indicated.
- When normally started, the system provides the
alkaline ionized water with previously set alkaline
value.
3. The product is ready to be used.
Voice guidance: “Alkaline Ionized Water on process.”
When the water supply control valve is turned off after
selecting and using “Strong” “alkaline”, the setting
will be restored back to the previously set value of
“Alkaline”.
Do not use the product in the “Strong alkaline” state
for a long period of time.
The power can be turned off due to the operation of
the system protective circuit depending on the
quality of water.
Indication light for water inflow.
When the tap water flows in, the water inflow indication light indicates Low when the
water pressure is low and High when it is high.
You are required to adjust and keep the water pressure to make the indication light stay
on at the center of the standard level.
When the indication light stays on at the standard level, about 1.5
0.5
/Min.
of water will flow through.
Operation indication panel
Alkaline pH
indication button
When the acidity pH selection button for the operation is pushed, the acidic
ionized water will flow through the alkaline ionized water outlet.
1. Open the water supply control valve to let the water flow in.
2. Use the acidity pH selection button for selecting.
(Melody comes out while the product is being used)
Voice guidance: Acidic Ionized Water on process.
3. Push the pH selection button to select the 1st stage or 2nd stage to obtain
the water. When the water supply control valve is turned off in the middle of
the water being used, the setting will be restored back to the previously set
value of Alkaline . In order to stop the operation in the middle of the use,
other selection buttons need to be pushed to select other functions.
Indication light for water inflow.
Refer to the Selecting the alkaline ionized water.
Acidity pH indication
button
Indication of operation
in progress
Indication of operation
in progress
