18
Selecting purified water -
Only processed through purification treatment, the water will go through the electrolysis process.
Indication of operation
in progress
Purified water indicating button
1. Open the water supply control valve to let the water flow in to generate the alkaline ionized
water of the set value.
2. Push the purified water indicating button.
- Indication light for purified water selection
Voice guidance: Crystal clear water on production.
3. Use the purified water.
4. When the water supply control valve is turned off in the middle of the water being used, the
selection of the purified water is called off and the setting will be restored back to the
previously set value of Alkaline . In order to stop the operation in the middle of the use,
other selection buttons need to be pushed to select other functions.
When the indication light for the purified water is turned off.
When there is a change in the water pressure leading to the lowering of the water level,
the indication light will be turned off and the setting will be restored back to the previously
set value of ‘Alkaline’. Use the product by setting the value again after adjusting the
water pressure.
Caution
Acidic ionized water is not for drinking, so do not drink it.
Use the water after letting the water flow through for about 5 seconds right after the generation is initiated.
Use the water initially daily after letting the water flow through for 10 ~ 15 seconds by opening the
water tap completely.
Use the water after letting the water flow through for more than 30 seconds when using the product
after not using it for a few days.
Should not remove the purification filter when letting the water flow through the main case.
Do not drink the drained water following the automatic Self-Cleaning, and the acidic water.
