Bionet CardioCare 2000 Operation Manual Download Page 30 | Manualshive

Page: 30 / 61

background image

30 / 61

Ver. 2.41

CardioCare2000 Operation Manual

2) Electrode connection

Check before connection

Check the system connection before measuring the patient

’s ECG.

-

Check that there

’s no mechanical hazard.

-

Check the connection of external cable and accessories.

-

Check all the measurement device to measure the patient

’s

Connecting the Electrodes

Put the patient to bed in relaxed state and apply some ECG GEL. Connect the electrodes

described in

“Electrode Positions”

Connecting the Patient Cable

Plug the patient cable into the input socket on the EKG2000. Defibrillation protected only if used

with the original Bionet patient cable.

Warning

Use only electrodes and patient cables provided from Bionet Co.,Ltd. Otherwise Bionet
Co.,Ltd takes no responsibility for accidents.

Lead-Off troubleshooting

If lead connection status is O.K, READY indicator lamp lights up when power switch is turned

on. If indicator lamp still does not light up after 10 seconds, it indicates lead-off status.

You can detect which one of leads is in lead-off status from operating MONITOR mode output.

Lead-off status happens in 2 cases.

First, lead comes off from the patient body. In case of this, connect the lead to the patient body

again.

Second, Conductivity between patient body and electrodes is poor. Incase of this, apply some

ECG gel to the electrodes and reapply it to the patient..

In exceptional circumstances if you are still troubled with poor EKG signal after troubleshooting
as described above, it can be a problem with the patient cable. Contact Service Center of Bionet
Co.,Ltd..

«
...
28
29
30
31
32
...
»

Summary of Contents for CardioCare 2000






























































Reviews:

No comments

Related manuals for CardioCare 2000

Brand: Makerfire Pages: 10

Brand: KaVo Pages: 16

Brand: MacDon Pages: 272

Brand: MacDon Pages: 70

Brand: XAG Pages: 24

Brand: UNIA Pages: 62

Brand: ParaBody Pages: 5

Brand: Baileigh Industrial Pages: 28

Brand: Baileigh Industrial Pages: 56

Brand: Cambridge Audio Pages: 2

Brand: Quanser Pages: 12

Brand: Hagie Pages: 141

Brand: Ocmis Irrigazione Pages: 100

Brand: Garmin Pages: 20

Brand: PASCO Pages: 5

Brand: Pasco Scientific Pages: 27

Brand: PARUS Pages: 6

ST60+ SPEED INSTRUMENT

Brand: Raymarine Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands