Bionet CardioCare 2000 Operation Manual Download Page 4

Page: 4 / 61

4 / 61

Ver. 2.41

CardioCare2000 Operation Manual

Definition of Warning, Caution, Note



For a special emphasis on agreement, terms are defined as listed below in

operation manual. Users should operate the equipment according to all the
Warning and Caution.



Manufacturer or Sales agency takes no responsibility for any kind of damage

or breakdown that is caused by misuse and failure to maintain the equipment. To
inform that it may cause no harm in life but lead to injury against the

“Caution” sign.

Warning

To inform that it may cause serious injury or death to the patient, property
damage, material losses against the

“Warning” sign.

Caution

To inform that it may cause no harm in life but lead to injury against the
“Caution” sign.

Note

To inform that it is not dangerous but important for proper installation,
operation, and maintenance of the equipment.

Summary of Contents for CardioCare 2000






























































Search results

Summary of Contents for CardioCare 2000

Reviews:

Related manuals for CardioCare 2000

Brands by name

Popular brands

Bionet CardioCare 2000, Operation Manual

Search results

Summary of Contents for CardioCare 2000

Reviews:

Related manuals for CardioCare 2000

Brands by name

Popular brands