ExiPrep
TM
16 Pro
Fully Automated Nucleic Acid Extraction System
A4(210X297)
-31-
VII. ExiPrep
TM
16 Pro Setup (continued)
6. Configuring the System
Only the single user with a registered administrator ID is able to configure the system. Do not forget the
administrator ID.
1. Press the ‘
Config
’ Button from the System Setup menu to
access the System Config menu.
Calibrates the
screen position
Adjusts the
screen
brightness
Manages user
IDs as well as
administrator
ID
Accessible
only by
authorized
engineers
Screen:
Calibrates the screen position
¾
Calibrate the screen position relative to touching.
¾
Press and hold the
circle
at the upper left corner with a
blunt tool for 2 seconds.
¾
Press and hold the
circle
at the bottom right corner with a
blunt tool for 2 seconds.
Bright:
Screen brightness adjustment
¾
Adjust the brightness of the LCD touchscreen using the
‘+’
and
‘–’
buttons.
¾
Press the ‘
ok
’ button to save the adjusted brightness
level. The previous menu will be displayed when the
new brightness setting is successfully applied.
¾
To return to the previous menu without saving the
adjustments, press the ‘
up’
button.
※
Factory (A/S menu): Only authorized service engineers may access this menu to service the
instrument.
