ExiPrep
TM
16 Pro
Fully Automated Nucleic Acid Extraction System
A4(210X297)
-12-
V. DNA/ RNA Extraction (continued)
2. Sample
Preparation
1. Place
‘Setup tray (A)’
on a
flat
surfaced desk.
2. On the Setup tray, put on the ‘
Buffer Cartridge
①
(D)’,
‘Elution tube rack (B), ‘Disposable tip rack (C)’.
¾
‘Setup Tray’ and ‘Tip Rack’ are supplied with
ExiPrep
TM
16
Pro.
¾
‘Buffer Cartridge’, ‘Disposable Tip’ and ‘Elution Tube’ are
supplied in the DNA/ RNA Extraction Kit.
3. Check DNA/ RNA extraction Kit for the samples and the
nucleic types to be extracted.
4. Place the number of
sample tube
(from the diagnostic kit) and
the
elution tube
to be extracted on the
Elution tube rack
.
¾
You may cut the strips if necessary to match the number
tubes to samples.
¾
Make sure front and rear sides of the Elution tube rack
before placing tubes.
5. Check the position of the Elution Tubes in the rack. Place the
Protection Cap (F) on to the rack until it clicks into place.
¾
DO NOT press too hard on the
Protection Cap
.
6. Place the
Disposable tip (E)
for the elution
on to the
Disposable tip rack.
