ExiPrep
TM
16 Pro
Fully Automated Nucleic Acid Extraction System
A4(210X297)
-11-
V. DNA/ RNA Extraction
1. Contamination Shield Installation
1.
From the ‘Menu’ screen,
click
‘MISC SET’
.
¾
Pull out the Syringe block all the way front (outside)
Contamination Shield.
CAUTION!
In order to use contamination shield, this must be installed on
the Base plate accessory.
2. Place the contamination shield on the lower-right side of the
Syringe block.
¾
Contamination shield has a magnet which means if you place
on the upside-down right, it will stick to the holding bar.
3. From the ‘
Menu’
screen, click
‘MISC SET’
.
¾
The base plate moves back to the initialization position
(inside the instrument).
