ExiPrep
TM
16 Pro
Fully Automated Nucleic Acid Extraction System
A4(210X297)
-8-
IV. Installing the ExiPrep™16 Pro
- Clear and clean the area where the instrument will be installed.
- Open the instrument door and remove the belt tie and rail bolt.
- Make sure that all components are included. Refer to the list of components on
page 6
.
1. Open the door and remove the
Screw-bolt (A)
from the rail.
2. Remove
the
Plate (B)
from the rail and the Syringe Block.
3. Remove the
Screw-bolt (C)
from the locking block which
immobilizes the belt.
4. Separate the Locking block (D, E) from the belt and remove
it.
