BinTec RS353j, User Manual

Page: 237 / 582

Field Description
original data packets, as the case arises.
Original Destination IP
Address/Netmask Only for Type of traffic =
% # 5 )3*!
Enter the destination IP address and corresponding netmask of
the original data packets, as the case arises.
Original Destination
Port/Range Only for Type of traffic =
% # 5 )3*!
,
Service =
$
and Protocol =
*6
,
.5
,
*6/.5
Enter the destination port or the destination port range of the
original data packets. The default setting
311
means that the
port is not specified.
Original Source IP Ad-
dress/Netmask Only for Type of traffic =
# # % )3*!
Enter the source IP address and corresponding netmask of the
original data packets, as the case arises.
Original Source Port/
Range Only for Type of traffic =
# # % )3*!
, NAT
method =
(%
, Service =
$
and Pro-
tocol =
*6
,
.5
,
*6/.5
Enter the source port of the original data packets. The default
setting
311
means that the port remains unspecified.
If you select
+%$( +
you can specify a single port, if
you select
+%$( + #
you can specify a continu-
ous range of ports which will be a applied for filtering the outgo-
ing data traffic
Source Port/Range Only for Type of traffic =
>%1# 2 )3*!
, Ser-
vice =
$
and Protocol =
*6
,
.5
,
*6/.5
Enter the source port or the source port range of the original
data packets. The default setting
311
means that the port re-
mains unspecified.
Destination IP Ad-
dress/Netmask Only for Type of traffic =
>%1# 2 )3*!
or
# # % )3*!
and NAT method =
(%
Enter the destination IP address and corresponding netmask of
the original data packets, as the case arises.
bintec elmeg GmbH
12 Networking
bintec RS Series 223