Field
Description
X.31 (X.25 in D Chan-
nel)
Select whether you want to use X.31 (X.25 in the D channel)
e.g. for CAPI applications.
The function is enabled with
"1
.
The function is disabled by default.
X.31 TEI Value
Only if X.31 (X.25 in D Channel) is enabled
With the ISDN autoconfiguration, the X.31-TEI is detected auto-
matically. If the autoconfiguration has not detected TEI, you can
manually enter the value assigned by the exchange.
Possible values are
to
&
.
The default value is
(for automatic detection).
X.31 TEI Service
Only for X.31 (X.25 in D Channel) = enabled
Select the service for which you want to use X.31 TEI.
Possible values:
•
63
•
63 5$1
•
%9 7%
(default value)
63
and
63 5$1
are only for the use of X.31 TEI for
CAPI applications. For
63
, the TEI value set in the CAPI ap-
plication is used. For
63 5$1
, the value of the CAPI ap-
plication is ignored and the default value set here is always
used.
%9 7%
is set if you want to use X.31 TEI for the X.25
device.
8.2.2 MSN Configuration
In this menu, you can assign the available ISDN numbers to the required services (e.g.
PPP routing, ISDN login).
If you use the ISDN interface for outgoing and incoming dialup connections, your own num-
bers for this interface can be entered in this menu (these settings are not possible for
leased lines). Your device distributes the incoming calls to the internal services according
bintec elmeg GmbH
8 Physical Interfaces
bintec RS Series
115
