Field
Description
value): The function is not used for this VSS. This is useful if
clients are to switch between different radio cells with as little
delay as possible, e. g. with Voice over WLAN.
•
F ?H " +$
: Preference is given to accept-
ing clients in the 2.4 GHz band.
•
?H " +$
: Preference is given to accepting
clients in the 5 GHz band.
Fields in the menu MAC-Filter
Field
Description
Access Control
Select whether only certain clients are to be permitted for this
wireless network.
The function is activated by selecting
"1
.
The function is disabled by default.
Allowed Addresses
Use Add to make entries and enter the MAC addresses (MAC
Address) of the clients to be permitted.
Dynamic blacklisting
You can use the Dynamic blacklisting function to identify cli-
ents that want to gain possibly unauthorised access to the net-
work and block them for a certain length of time. A client is
blocked if the number of unsuccessful login attempts with a spe-
cified time exceeds a certain number. This threshold value and
the duration of the block can be configured. A blocked client is
blocked at all the APs that are managed by the wireless LAN
controller for the VSS concerned, so neither are they able to log
into a different radio cell in that VSS. If a client needs to be
blocked permanently, this can be done in the Wireless LAN
Controller->Monitoring->Rogue Clients menu.
The function is activated by selecting
"1
.
The function is activated by default.
Failed attempts per
Time
Enter the number of failed attempts that have to originate from a
specific MAC address during a certain time for a blacklist entry
to be created.
Default values are
failed attempts during
seconds.
bintec elmeg GmbH
11 Wireless LAN Controller
bintec RS Series
193
