Field
Description
The currently selected channels are displayed here.
With Add you can add channels. If all available channels are
displayed, you cannot add any more entries.
You can delete entries with the
icon.
RTS Threshold
Here, you select how the RTS/CTS mechanism is to be
switched on/off.
If you choose
. $
, you can specify in the input field
the data packet length threshold in bytes (1 - 2346) as of which
the RTS/CTS mechanism is to be used. This makes sense if
several clients that are not in each other's wireless range are
run in one access point. The mechanism can also be switched
on/off independently of the data packet length by selecting the
value
317(
or
317( $$
(default value).
Short Guard Interval
Enable this function to reduce the guard interval (= time
between transmission of two data symbols) from 800 ns to 400
ns.
Fragmentation
Threshold
Enter the maximum size as of which the data packets are to be
fragmented (i.e. split into smaller units). Low values are recom-
mended for this field in areas with poor reception and in the
event of radio interference.
Possible values are
to
&
.
The default value is
&
bytes.
If
3%% 61
is selected for Operation Mode, the following parameters are addition-
ally available under Advanced Settings:
bintec elmeg GmbH
10 Wireless LAN
bintec RS Series
149
