Fields in the ATM Profiles Parameter menu.
Field
Description
Provider
Select one of the preconfigured ATM profiles for your provider
from the list or manually define the profile using
.
$
.
Description
Only for Provider =
. $
Enter the desired description for the connection.
ATM Interface
Only if several ATM interfaces are available, e.g. if several inter-
faces are separately configured in devices with SHDSL.
Select the ATM interface that you wish to use for the connec-
tion.
Type
Only for Provider =
. $
Select the protocol for the ATM connection.
Possible values:
•
3*'
(default value): Ethernet over ATM
(EthoA) is used for the ATM connection (Permanent Virtual
Circuit, PVC).
•
@ % 1 3*'
: Routed Protocols over
ATM (RPoA) is used for the ATM connection (Permanent Vir-
tual Circuit, PVC).
•
3*'
: PPP over ATM (PPPoA) is used for the ATM
connection (Permanent Virtual Circuit, PVC).
Virtual Path Identifier
(VPI)
Only for Provider =
. $
Enter the VPI value of the ATM connection. The VPI is the iden-
tification number of the virtual path to be used. Note your pro-
vider's instructions.
Possible values are
to
.
The default value is
.
Virtual Channel Identi-
fier (VCI)
Only for Provider =
. $
Enter the VCI value of the ATM connection. The VCI is the iden-
bintec elmeg GmbH
15 WAN
bintec RS Series
311