Binder KB 115 (E4), Operating Instructions Manual

Page: 27 / 149

KB (E4 + E6) 02/2017 page 27/148
Fixed value
08.03.2015 05:05:06
General menu (next page)
(“Optional equipment” menu item is visible only with
optional chamber equipment)
..\ Menu
Measurement chart
Optional equipment
Sensor adjustment
Service contact
System information
Close Home
Controller mode
Switching between the operating modes “control off ” or “fixed value”,
chap. 6.2.1
Event list Display of status information and errors, chap. 15
Alarms Alarm settings, chap. 14.5
Setpoints Setpoint entry in “Fixed value” operating mode, chap. 7.5
Safety controller Setting the safety controller, chap. 17.2 and 17.3
Programs Time and week programs, chap. 9 and 10
Import/Export Data transfer via USB interface, chap. 13
Settings General controller settings, chap. 12
Measurement chart Graphical display of the measured values, chap. 16
Optional equipment
Setting for optional equipment like interior socket, zero-voltage relay
control outputs, alarm output, object temperature display, chap. 7
(menu item is visible only with optional chamber equipment)
Sensor adjustment
Adjustment menu for single-point and two-point adjustments (for Ser-
vice purpose)
Service contact Service information
System information Chamber information (model, name, serial no., firmware etc.)