Binder KB 115 (E4), Operating Instructions Manual

Page: 81 / 149

KB (E4 + E6) 02/2017 page 81/148
12. General controller settings
In the "Settings" submenu, you can enter the date and time, select the language for the menus and the
desired temperature unit, perform the configuration for the controller’s communication functions, and reset
the controller to factory settings.
To access the "Settings" submenu, go to Menu > Settings
Fixed value
08.03.2015 05:05:06
Submenu “Settings”.
Turn the operating button to see additional menu
items.
..\ Settings
Setup wizard
Date and time
Sprache, Language, Langue, Idioma, Lingua
Display brightness
Temperature unit
Recording rate
Factory reset
Network settings
Close Home
Fixed value
08.03.2015 05:05:06
Submenu “Settings” (next page)..
..\ Settings
Chamber configuration
Close Home
Setup wizard Chap. 12.1
Date and time Setting date and time, chap. 12.2
Sprache, Language, Langue,
Idioma, Lingua
Selecting the controller’s menu language, chap. 12.3
Display brightness Adjusting display brightness by turning the operating button
Temperature unit Selecting the temperature unit, chap. 12.5
Recording rate Defining the recording rate for data storage, chap. 12.6
Factory reset Factory reset, chap. 12.7
Network settings Network configuration, chap. 12.8
Chamber configuration
Menu for service purpose – Display and entry of chamber data (serial
no., special application no., option object temperature, chap. 12.10